Customer Readiness

Welcome to Verizon’s Customer Readiness Website. This site will assist you in preparing for your Verizon service installation. Reviewing the content on this site and following some simple steps will help facilitate a smooth installation of service.

Share

Example of Demarc

Click on the image to download.

Ciena 3903

 

 

 

 

 

 

 

Overview:

Designed for small and medium business applications requiring reliable GbE services, Ciena’s 3903 Service Delivery Switch is an advanced Ethernet business demarcation platform in a compact form factor.

Reliability and Performance:

The 3903 includes Ciena’s performance test hardware engine to provide RFC2544 and Y.1564 benchmark performance test capabilities, enabling full line-rate, customer traffic measurements end to end across the Ethernet Virtual Circuit (EVC). Performance testing also improves end-customer satisfaction by enabling the Network Operations Center (NOC) to be very responsive to SLA impacts and increasing the performance metrics available for end-customer SLA reporting.

Technical specifications

INTERFACES MANAGEMENT PHYSICAL
2 x 100/1000M SFP NNI/UNI ports
1 x 10/100/1000M RJ-45; 100/1000M SFP UNI combo port
1 x Console Port (RJ-45, EIA-561)
Enhanced CLI
CLI-based configuration files
SNMPv1/v2c/v3
SNMPv3 Authentication and Message Encryption
RFC 1213 SNMP MIB II, 1493 Bridge MIB, 1573 MIB II Interfaces, 1757 RMON MIB, 2021 RMON II, 2866 RADIUS Accounting, 1350 Trivial TFTP
Per-VLAN Statistics
RADIUS Client and RADIUS Authentication
Secure File Transfer Protocol (SFTP)
Secure Shell (SSHv2)
Syslog with Syslog Accounting
Port State Mirroring
Virtual Link Loss Indication/Remote Link Loss Forwarding (VLLI/RLLF)
Dual-Stack IPv4/IPv6 management plane
Local Console Port
Comprehensive Management via Ethernet Services Manager
Remote Auto configuration via TFTP, SFTP
Software download/upgrade via TFTP, SFTP
Mounting:
Wall, desktop, rack

Dimensions:
> 8.5" (W) x 8.0" (D) x 1.5" (H)
> 216mm (W) x 204mm (D) x 38mm (H)
Weight: 3.0lbs; 1.4kg
POWER REQUIEREMENTS ETHERNET SERVICES
Two built-in redundant power supplies
DC Input: -48, -/+ 36, -/+24 VDC (nominal)
AC Input: 100V, 240V AC (nominal)
AC Frequency: 50/60 Hz
Maximum Power Input: 52W
IEEE 802.1ag Connectivity Fault Management (CFM)
IEEE 802.3ah Ethernet in the First Mile (EFM)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
ITU-T Y.1731 Performance Monitoring
RFC 2544 Performance Benchmarking Test Generation and Reflection up to 1GE
ITU-T Y.1564 Ethernet Service Activation Test Methodology
RFC 5618 TWAMP Responder and Receiver
TWAMP Sender
TWAMP +/- 1ms timestamp accuracy
Dying Gasp with Syslog and SNMP Traps

Overture 1400

 

 

 

 

Overview:

The Overture 1400 is a modular 1 gigabit Carrier Ethernet edge platform that enables ubiquitous Ethernet services from 1Mbps to 1Gbps over both native Ethernet and the existing TDM infrastructure. For native optical Ethernet networks, the Overture 1400 provides a complete edge solution with six tri-speed interfaces. When native optical Ethernet is not available, the flexible network interface slot may be used for Carrier Ethernet over existing SONET/SDH and PDH (DS3/E3, DS1, E1) networks. The Overture 1400 provides a complete toolkit for service differentiation and performance assurance along with the operational savings that comes from a single flexible platform.

The Overture 1400 GigE Carrier Ethernet edge platform was developed in conjunction with leading service providers and is unique in three fundamental areas:

Reliability and Performance:

Carrier class means 99.999% availability, sub-50ms protection switching, and low-latency line-rate throughput on every interface. The compact, temperature-hardened Overture 1400 is designed for the demanding environments of the telco central office, outside plant cabinet, datacenter or enterprise wiring closet. In addition, the 1400 provides the resiliency and monitoring features required for high-performance financial services and data center applications.

Technical Specifications:

INTERFACES MANAGEMENT PHYSICAL
4 x 10/100/1000 Electrical
6 x SFP, SX/LX/ZX/CWDM

Hot-swappable interface modules
> 1 x OC3/OC12 or STM1/STM4
> 4 x OC3/OC12 or STM1/STM4 
> DS3/E3
> 3 x DS3/E3 (Rel. 12.1)
> 8 x DS1/E1
Supports local and inband management

802.3ah, 802.1ag, Y.1731
RFC2544 (R12.1)
256 MEPs
UNI 2.2 E-LMI
LAN/WAN fault propagation (Rel. 12.1)
LLDP (Rel.12.1)
SNMPv3
RADIUS
Syslog
Dimensions:

1.75H” x 17W” x 8D” (45 mm x 430 mm x 200 mm)
Mounting: 1RU in standard 19” or 23” rack
Weight: 5 lb (2.26 kg) maximum
Operating temperature: -40° to +149°F (-40° to +65°C)
Humidity: 5-90% non-condensing relative humidity
Hot-swappable redundant power supplies and optics
Input voltage: -48VDC, AC Power
CONFIRGURATION OPTIONS ETHERNET SERVICES COMPLIANCE AND CERTIFICATION
MEF E-LINE, E-LAN and E-TREE

Network interfaces:
> 2 GigE, sub-50ms LACP
> OC3/OC12 1+1 APS
> STM1/STM4 1+1 APS
> Line-rate 1GigE over 2 x OC12/STM4
> Line-rate 1GigE over dual-protected
> OC12/STM4
> DS3/E3 (X.86, GFP)
> 3 x DS3/E3 (PDH/VCAT/LCAS)
> 8 x DS1/E1 (PDH/VCAT/LCAS or
> MLPPP bonding
128 EVCs
Triple tag management
Hierarchical QoS
128 dedicated queue groups, 1024 queues
LACP, 50ms protection
Dynamic p-bit marking (Rel. 12.1)
CE Mark
EN 60950
FCC Part 15, EN 55022
MEF 9, 14, 20
NEBS Level 3, Zone4
RoHS
WEEE

Cisco ME 1200

 

 

 

 

 

 

Overview:

The Cisco ME 1200 Series Ethernet Access Device provides all the features required for MEF 2.0 service initiation, including services such as ELINE, ELAN, and EACCESS. To help maintain proper QoS for these services, the Cisco ME 1200 Series offers rich traffic classification and hierarchical QoS for per-port per services. To help ensure that service level agreements (SLAs) are enforced, ingress traffic policing and egress shaping are also supported.

Reliability and Performance:

As more advanced network services move into the cloud or data center, there is a need for a device with a low port density with carrier grade Ethernet, advanced QoS, and performance measurement capabilities. With low latency and OAM performed in hardware, the Cisco ME 1200 Series Ethernet Access Device resides close to the customer, providing service assurance while network services are remote in the data center.

Technical Specifications:

INTERFACES MANAGEMENT PHYSICAL
2 x RJ45 Gigabit Ethernet interface
4 x Gigabit Ethernet interfaces
Management Options

> Standalone mode with Webgui
> Standalone mode with Prime Network, Prime Provisioning, Prime Performance
> Controller mode with Controller on ME3600X and ME3800X

Zero Touch provisioning (ZTP)
Syslog
SNMP v1, v2, v3 (crypto, non-crypto)
DHCPv4 client
DHCP server
RMON
SSL
Simple Network Management Protocol (SNMP)
XML over HTTPS
WSDL data model
Dimensions:
> 10.6”(W) x 1.75”(H) x 7.1”(D)
> 269mm(W) x 44mm(H) x 180mm(D)

Weight:
> ME1200-4S-A: 2.84 lb (1.29 Kg)
> ME1200-4S-D: 3.13 lb (1.42 Kg)
POWER REQUIEREMENTS ETHERNET SERVICES
AC Input:
100-240VAC, 50-60Hz

DC Input:
20.5V to 72VDC
IEEE 802.1ag Connectivity Fault Management (CFM)
IEEE 802.3ah Ethernet in the First Mile (EFM)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
ITU-T Y.1731 Performance Monitoring
RFC 2544 Performance Benchmarking Test Generation and Reflection up to 1GE
ITU-T Y.1564 Ethernet Service Activation Test Methodology
RFC 5618 TWAMP Responder and Receiver
TWAMP Sender
TWAMP +/- 1ms timestamp accuracy
Dying Gasp with Syslog and SNMP Traps

Services and/or features are not available in all countries/locations, and may be procured from in-country providers in select countries. We continue to expand our service availability around the world. Please consult your Verizon representative for service availability. Contact us.